Top

2025 Land Pride RC2515 Rotary Cutter

Call for Price

Overview

Availability Brochure

Year2025

MakeLand Pride

ModelRC2515 Rotary Cutter

Product Features

Description

Land Pride's RC2515, a 15' version of our popular 12' medium-duty Rotary Cutter, is an economical solution for general grass cutting needs. The Land Pride gearboxes feature a 1-5/8" output shaft and stout lower bearings. The gearboxes are driven by a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection on all three. The ride is cushioned by a deck-mounted spring and can be enhanced with optional 29" used aircraft tires -- either 4 or 6 per cutter.

Features & Benefits

Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
Factory assembled: Saves customer set-up time and money.
5 Year gearbox warranty: Shows confidence in gearbox integrity.
160 hp Divider gearbox and 75 hp wing gearboxes: A rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
Input driveline: Cat. 4 CV: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
Easy greasable drivelines: Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
2 Plate slip-clutch: Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
high blade tip speed: Allows clean cutting of material and even distribution
6" Blade overlap: Eliminates skipping during turns.
11 1/4" Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
Stump jumper backed with a thick: mounting bar Allows cutter to slide over obstructions protecting gearbox output shaft & bottom seal.
10 gauge smooth deck top : Reduces accumulation of debris and is easier and faster to clean.
1/4" Plate side skirt: Reduces debris piercing possibilities.
Low hitch weight: Less drawbar wear. Less ballast required. Works well with lighter tractors
Dual remote hydraulics: Easy to operate. Fits most tractors, only two duplex outlets required to lift wings and change cutting height separately
Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting. Wings will hinge 20o down.
7/8" Solid hinge rods: Gives great strength to the cutter from front to rear, and in the hinge area itself
Wing transport lock: Holds transport wings in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Spring-cushioned lift cylinder: Cushions loads on drawbar
Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.
7/8" Leveling rods: Large diameter leveling rods provide superior supporting strength over rough terrain.
Airplane tires: Gives better cushion while transporting and provides flotation in soft ground.

Specifications & Capacities

Tractor Horsepower: 50-100 hp (37-75 kW)
Gearbox horsepower: Splitter: 160 hp (119 kW)
Gearbox horsepower: Center & Wings: 100 hp (75 kW)
Gearbox input shaft: 1 3/8" 6 Spline
Gearbox output shaft: 1 5/8"
Center & Wings Gearbox capacity & lubrication: 5.75 Pints (2.72 L) of gear lube 80-90W EP
Splitter Gearbox capacity & lubrication: 4.5 Pints (2.13 L) of gear lube 80-90W EP
Cutting capacity: 1 1/2" (3.8 cm)
Hitch weight: 1,022 lb (464 kg)
Machine weight: 3,202 lbs. with chain guards & four laminated tires.
Blade tip speed at 540 rpm: Center blades & wing blades = 14,963 FPM (76 mps)
Hitch jack: Standard 2,000 lbs (907 kg)
Hitch types: Pull-type hitch & clevis
Cutting width: 15' - 0" (4.57 m)
Overall width: 15' - 7" (4.75 m)
Normal transport width: 10' - 2 1/2" (3.11 m) With transport locks set and cutter blade 13" (33 cm) off the ground.
Minimum transport width: 8' - 4" (2.54 m) With transport locks set and cutter blade 2" (5 cm) off the ground.
Overall length: 15' - 2" (4.62 m) With laminated tires, 15' - 5 1/2" (4.71 m) With aircraft tires
Deck height: 11 1/4" (29 cm)
Cutting height: 2" to 13" (5 cm to 33 cm)
Lift hydraulics: 2 1/2" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
Wing hydraulics: 2 1/2" x 10" hydraulic cylinders, hoses & fittings
Wing transport protection: Wing transport locks
Deck material: 10 Gauge (3.4 mm) deck
Side skirt material: 1/4" (6 mm) Plate
Skid shoes-Wing deck: 1 replaceable shoe per wing
Skid shoes-Center deck: 2 replaceable shoes
Blade rotation left wing: Clockwise
Blade rotation center deck: Counterclockwise
Blade rotation right wing: Counterclockwise
Blades - 6 (2 per deck):1/2" x 4" Heat treated free swinging alloy steel with up lift
Blade overlap: 6" (15 cm)
Blade bolt: Keyed with hardened flat washer & locknut
Stump jumper / blade holder: 10 Gauge (3.4 mm) round dish shaped pan, reinforced with 1" x 4" (2.5 cm x 10.2 cm) blade bar
Front & rear guards: Single chain or rubber
Input driveline: ASAE Category 4 with constant velocity u-joint
Intermediate & wing drivelines: ASAE Category 3 with slip-clutch
Wheels: 29" Used aircraft tires or 21" laminated wheels
Number of wheels: 4 or 6 Total
Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
Transport axle: Spring-cushioned lift cylinder
Colors: Standard color: Beige; Optional colors: Green, Orange, or Red

Product Specs

General

Working Width	15 ft. (4.57 m)
Width	15 ft. 7 in. (4.75 m)
Length	With laminated tires: 15 ft. 2 in. (4.62 m); With aircraft tires: 15 ft. - 5 1/2 in. (4.71 m)
Weight	3,202 lb.
Recommended HP	50-100 HP (37-75 kW)