Top

2025 Kubota BR510 Breaker

Call for Price

Overview

Availability Brochure

Year2025

MakeKubota

ModelBR510 Breaker

Product Features

Description

Kubota by Land Pride: The Kubota-branded line of BR Series Breakers is ideal for compact excavators and skid steers or compact track loaders. They are ideal for demolition, frozen ground, and as a rental tool where optimum power and breaking efficiency is required. Only available through Kubota Dealers.

Features & Benefits

Oil fired: Oil fired units do not have a bladder of nitrogen that has to be re-filled.
No tie rods: Tie rods can become loose and need tightening periodically
Service interval = 1000 hrs.: The Hydraulic Breaker is built tough to last a long time between service intervals.
Higher impact rate, Up to 2600 bpm (bumps per minute): Able to complete the job faster than most machines.
All models operate quiet: Each model has a lower operating noise level than the competitors.
Standard tools included: 1 moil point and 1 chisel point: All hammers are shipped with two of the most heavily used tools to ensure the hammer is equipped to work.
BR510, BR560, & BR860 models have CBE (Constant blow energy): Constant energy throughout a given oil flow range means less drop off in effective energy with lower oil flow and pressures.
Models with CBE span a larger hydraulic range: Fewer adjustments between power machines.

Breaker Specifications & Capacities

Frequency range: 600-1800 bpm
Oil flow range: 9-24 gpm (35-90 Lpm)
Operating pressure: 1300-2030 psi (90-140 bar)
Pressure relief setting minimum: 2030-2900 psi (140-200 bar)
Pressure relief setting maximum: 3190 psi (220 bar)
Back pressure, maximum: 290 psi (20 bar)
Operating weight: 635 lbs (288 kg)
Tool shank diameter: 2.83 in (72 mm)
Mini-excavator, tractor backhoe weight: 3.7-8.8 ton (3.4-8.0 m ton)
Skid steer, robot weight: 2.1-3.95 ton (1.9-3.6 m ton)
Net weight: 553 lb. (251 kg)

Tool Specifications - Chisel Tool

Part number: BJ631SK
Length: 25 5/8 in (650 mm)
Weight: 42 lbs (19 kg)

Tool Specifications - Moil Tool

Part number: BJ633SK
Length: 25 5/8 in (650 mm)
Weight: 42 lbs (19 kg)

Tool Specifications - Spade, Parallel

Part number: BJ635SK
Length: 25 5/8 in (650 mm)
Base width or diameter: 6 in (150 mm)
Weight: 40 lbs (18 kg)

Tool Specifications - Spade, Transverse

Part number: BJ636SK
Length: 25 5/8 in (650 mm)
Base width or diameter: 6 in (150 mm)
Weight: 40 lbs (18 kg)

Tool Specifications - Compact Plate

Part number: BJ637SK
Length: 20 1/8 in (510 mm)
Base width or diameter: 13 in (330 mm)
Weight: 112 lbs (51 kg)

Product Specs

General

Weight	553 lb. (251 khg)
Tool Diameter	2.83 in (72 mm)
Impact Frequency Range	600-1800 bpm
Oil Flow Range	9-24 gpm (35-90 Lpm)
Operating Pressure Range	2030-2900 psi (140-200 bar)